I know how frustrating it can be when your Xbox One beeps, but it won’t turn on and it isn’t going to turn off by itself. Many people have dealt with this issue at some point or another in their lives, unfortunately. The Xbox One won’t turn on at all and instead beeps when you try to turn it on, but there are a few things you can try to solve the problem.

Press and hold the power button for 5 seconds (while unplugged) if your Xbox One won’t turn on but beeps. After plugging your Xbox back in, hold down the power button for 10 seconds.

Try power cycling and soft reset the Xbox One if it won’t turn on and beeps.

The Xbox One beeps, but won’t turn on when you try to turn it on, you can try a soft reset, power cycle, or a combination of these two methods.

As a result of this process, your console will be drained of all stored power, so it is recommended that you perform a soft reset first.

Soft reset

You can release built-up power from your console by performing a soft reset.

There will be no effect on your installed games or apps, so you won’t have to worry about having to reinstall anything.

You can soft reset your Xbox One by following these steps.

• Verify that the power cord of the console is disconnected from the wall outlet.
• While the console is unplugged, wait for about fifteen seconds and press the power button once or twice. As a result, any extra power that has been stored in the console’s capacitors will be discharged.
• The power cord for the console should be plugged back into the wall outlet.
• Check if your issue has been resolved by turning the unit back on.

Power cycle

It is recommended that you perform a power cycle on Xbox One if the soft reset did not work. You will not be affected by this process if you have games or other apps.

The steps below will guide you through power cycling your Xbox One.

• For 10 seconds, hold down the power button while your Xbox is off.
• A white light will eventually replace the orange light on the power brick.
• As soon as the indicator light on your Xbox turns steady orange, your Xbox has entered standby mode.
• In order to bring your Xbox out of standby mode, you will need to press the power button once more.

On the Xbox One console, you will find a variety of buttons.

It is possible to reset the console using various combinations of buttons directly on the console if the previous soft reset and power cycle did not work for you.

There is likely a loop in the internal software that needs to be broken with an input. You can do just that by pressing certain buttons and the console will start working again.

Using Xbox One’s triple button hold.

The solution requires pressing three buttons simultaneously, and is normally used to break a continuous loop in internal software.

You can use it often if you run into problems and your stored games and apps will not be affected.

• Hold down the Power, Eject, and Sync buttons at the same time.
• For 10 seconds, hold down the buttons steadily.
• The Eject button should be released after 10 seconds.
• A further 15 seconds should be held after pressing Power and Sync.
• Sync and Power buttons should be released after 15 seconds.
• The console will start syncing once you press and hold the Power and Sync buttons a second time.

Eject button tapping.

It has been a common fix that has been discussed on various Xbox public forums for a long time.

Many people have had success with it to reset the internal software and get back on track with Xbox.

• The Eject button should be tapped repeatedly ten times. 

When you try this option, you do not need a disc in the tray.

As a result, the software will focus on something else, such as removing the disc tray from the drive. It may be possible to fix the problem by simply inserting a new disc.

If this works, the components should be able to focus on reading the disc you just inserted rather than the software loop.

There are a few common reasons why the Xbox One won’t turn on but beeps.

When your Xbox One won’t turn on but beeps instead of turning on, there may be a variety of reasons for this. Every problem has a solution, but some solutions are easier and cheaper than others.

Xbox One won’t turn on but beeps when it overheats which is the cause of the problem.

In case your Xbox console becomes overheated, you may hear beeps and the console won’t turn on. The reason for this can be caused by the fact that you leave your console on most of the time, or if dust is blocking the ventilation system.

Turning off the Xbox for at least 30 minutes or longer after it has been on for a long time will allow the internal components and power brick to cool.

As a result of this short break, the temperature of the unit will be lowered and future issues will be prevented.

Compressed air or a gentle brush can be used to dislodge and remove dust buildup from the vents on the console. In the future, this will allow more airflow and prevent overheating.

Xbox One won’t turn on but beeps constantly because of a problem with the power brick and the cable.

A faulty power supply may cause your Xbox to beep, but it won’t turn on because it doesn’t have enough power.

A power brick or a cord may be the source of this problem, or it may be the cord itself. Over time, an aging power brick may become overloaded by the Xbox One console, resulting in beeps but the console won’t turn on.

In this case, it is recommended that you replace the cable as well as the power brick.

On Amazon or directly from Xbox, you can find a variety of aftermarket Xbox power supplies.

It is possible to replace the cable and brick together, or to replace one first and then the other.

Xbox One won’t turn on but beeps indicating that the internal power supply is faulty.

The Xbox One won’t turn on but beeps continuously, which indicates that the problem may be caused by the internal power supply unit and not by the external power supply.

Despite being an integral part of the console, this component can sometimes overheat and malfunction.

It is possible to replace this component, but it is a rather expensive repair that requires a trained technician.

Buying a different console is usually more cost-effective for older Xbox models.

Xbox One won’t turn on but beeps due to moisture on the motherboard.

It is never a good idea to mix moisture and electronic devices. Sometimes Xbox components, like the motherboard, get moist when the liquid cooling system isn’t working right or when the temperature changes.

Problems occur when the Xbox is stored in a cold room and then turned on, or if the room where it is used is unusually humid.

The presence of moisture on a motherboard can result in Xbox One issues such as the console refusing to turn on at all or making beeps but won’t turn on.

It is also possible for moisture to cause sparks and short circuits on a motherboard if it is severe enough.

Your console can be dried out in a variety of ways.

• Let the moisture drip out of the console by turning it at an angle.
• Dry the internal components with a hairdryer on the coolest setting.
• It is best to let the Xbox sit for two to three days so that it can naturally dry.
• A dehumidifier can be used to remove moisture from the air and console.

Buy a new Xbox if you are still facing the same issue.

A new Xbox One may be necessary if you can’t get your Xbox One to work again.

The Xbox Series S is the smallest Xbox ever, so if you want to go all digital, grab one!

Conclusion

You should try the above troubleshooting solutions before contacting a professional to repair or replace your Xbox One.

You should try a soft reset and/or a power cycle as the first option you should try. The chances of your Xbox fully powering up are high with both of these methods.

It is possible to reset the internal software by pressing and holding certain console buttons for a short period of time. 

The ventilation grate should be cleaned and the motherboard should be checked for moisture if that doesn’t work.

You may have to repair or replace the console itself if none of the solutions listed here work for you.

How did you fix your Xbox One if it won’t turn on but you hear beeps every time you try to turn it on? Please let me know what you think in the comments section below!

Read More: