Do you remember the time when your Samsung washer Self Clean feature was blinking when you went to wash out the drum?
The drums inside Samsung washing machines can be easily cleaned without contacting a technician or using chemicals.
With Samsung Washer Self Clean, you don’t have to worry about leftover chemicals and bad odors in the washing machine, and the machine will clean itself.
If you simply want to incorporate self-cleaning into regular machine maintenance, here are some instructions on how to use the Samsung washer Self Clean feature.
Table of Contents
Why Use Samsung Washer Self Clean?
What makes Samsung washers different from other washing machines? Instead of cleaning them yourself, why would you choose Samsung washers with Self Clean cycles?
Although Samsung washing machines don’t make it easier to access everything inside the drum, they do have a feature that lets you clean the drum without reaching inside.
As an added benefit, Samsung Washer Self Clean eliminates the need to use spray vinegar and other cleaning chemicals that are contrary to Samsung’s manufacturer recommendations.
Last but not least, the Samsung washer Self Clean feature eliminates the need to handle wastewater.
The drum cannot be completely cleaned even with regular maintenance and manual cleaning if you prefer to manually clean your machine.
As part of the Samsung washer, the Self Clean feature uses minimal water, is designed specifically for the machine, and is water-efficient.
Additionally, Samsung’s washer Self Clean feature keeps your machine as clean as possible.
You will remain in compliance with Samsung’s warranty policy if you need maintenance performed on your unit for any other reason.
Samsung Washer Self Clean – How To Use It
Here are instructions for how to self clean your Samsung washer
Samsung Washer Self Clean works on Samsung washing machines by following these steps:
Connect the machine to the power source
Ensure that the machine is empty before starting it
Press the power button
Press the Self Clean button
Click on the Start button
After the cycle ends, run a load of laundry one hour later (or four hours for front-loaders).
Bleach is the best way to self clean your Samsung washer
When your Samsung washer has an odor or visible mold or mildew, you can run the Self Clean cycle with liquid chlorine bleach in the detergent container. Check that the problem has been fixed after the Samsung Washer Self Clean cycle ends by following these steps:
Connect the machine to the power source
Check to see if the machine is empty
Press the power button
In the washing machine, fill the detergent container to the top with liquid bleach
Press the Self Clean button
Click on the Start button
You must wait one hour after the cycle ends (or four hours if your machine is front-loading)
Make sure the washing machine tub is clean by wiping it down
Run a spin cycle after rinsing
Let the unit air dry by opening the lid and detergent container
If your pump has a filter, clean it (only front-loading models).
If your machine is still not performing at its best, contact support
Samsung Washer Self Clean: How Often Should You Use It?
It is likely that you already have regular maintenance and cleaning habits to keep your Samsung washing machine in top shape.
With the factory-designed Self Clean feature, you can make sure your machine is always as clean as possible.
Using the Self Clean feature will save you time and energy by not having to regularly clean and maintain your machine.
Cleaning the drum and other interior components of a washing machine is easy and requires little effort. Your unit will also last longer if you do this.
When should you use the Self Clean cycle on your Samsung washer? According to Samsung, the Self Clean feature should be used every month at the very least.
People who regularly use their computers should be concerned about this, as they are the only ones who should be concerned about it. Using Self Clean after a specified number of loads is recommended if you use your machine frequently or several times per day.
Front-load versus top-load machines
The Self Clean cycle should be run every twenty loads on a top load machine with its lid at the top.
Approximately one time every two weeks would be equivalent to doing two loads of laundry per week.
Front-loading machines with doors that open towards the user rather than up should use the Self Clean cycle every forty loads.
The amount of laundry you do every weekday would be approximately once a month if you do two loads every weekday.
Would vinegar work just as well?
The use of vinegar to clean washing machines is a popular DIY method (or in addition to the self-clean cycle), but this is not recommended.
Samsung recommends that you use either the Self Clean cycle or liquid chlorine bleach to avoid damaging the washer.
What Does It Mean When the Self Clean Light Blinks?
Samsung washing machines have a light for Self Clean that blinks or turns on when you use them.
There is an indicator built into Samsung washing machines that indicates when the Self Clean cycle needs to be run.
Consumers were considered when programming the notification light feature.
With the blinking light, you know when it is time to clean your washing machine, so you don’t have to remember and you don’t have to keep track of each load.
The Self Clean light blinks when the pre-installed program requests you run it, indicating it’s ready to run.
Regardless of whether it is a front-load or top-load washer, the Self Clean light activates after twenty loads.
A washing machine without the Self Clean cycle will start blinking after five loads, and after twenty more loads without it.
Even though you can ignore the notification light to a certain extent, it is important to note when your Samsung Washer Self Clean needs maintenance.
You might have to hire a professional technician to clean your washing machine drum and other components if you ignore the light for too long.
If Samsung Washer Self Clean Doesn’t Work, What Should I Do?
Maintaining a clean Samsung washing machine is the best way to prevent mold, mildew, and odor.
Additionally, the machine should be as efficient as possible in performing its tasks.
What Are the Signs That Self Clean Isn’t Working?
You may want to run the Samsung washer Self Clean cycle if you notice an odor coming from your washer.
However, if the odor persists after running Samsung washer Self Clean, it might mean that the feature isn’t working properly.
A Self Clean cycle can also be used if your washing machine does not wash clothes properly.
However, if your clothes are not properly cleaned after using the Self Clean cycle, the feature might not be working.
To troubleshoot, follow these steps:
Perform a standard Self Clean cycle
Run a spin cycle after rinsing
Laundry should be washed in a light load
Use bleach in the Self Clean cycle
Put the machine through a rinse and spin cycle
Laundry should be washed in a light load
As a result of completing those steps, you should now be able to resolve the issue. Once you’ve exhausted those common solutions, you might want to contact customer service if the Self Clean feature still doesn’t work.
Customer Support Samsung
You can chat with Samsung 24 hours a day, 7 days a week through its online support feature.
Using Samsung’s online platform, you can contact one of Samsung’s preferred vendors if your machine’s Self Clean feature is defective.
In addition, you may contact a technician independently, although Samsung does not recommend this route. Alternatively, you can schedule a technician visit to your home and communicate with Samsung support directly through their website. Directly bringing your machine to a service center allows you to choose the location of your choice.
Read More: