You can resolve the Ring doorbell blinking or flashing blue issue by following the steps provided in this article as a guide. There is no doubt that the Ring doorbell is one of the most popular smart doorbells available on the market today. Installs easily, streams high-quality video and audio, and works with most home automation systems.
If you have never used one before, however, you might find it a bit confusing if you have never used one before. Different patterns can mean different things when it comes to the blue flashing or blinking light on your doorbell.
There may be a few things you need to take care of before you can figure out why your doorbell is flashing or blinking a blue light.
Therefore, let’s take a closer look at why your ring doorbell is flashing or blinking blue, why it is doing this, and how you can resolve it.
Table of Contents
Is There a Cause Why My Ring Doorbell Is Flashing or Blinking Blue Lights?
In the event that your Ring doorbell is flashing or blinking blue, try setting some alarms and checking your internet connection. If the Ring doorbell is still flashing or blinking blue, you can contact the Ring support team for further assistance.
Status and error messages are communicated by the circular light on the front of your Ring doorbell.
Depending on how fast it blinks, what part of the circle it lights up, and whether it is solid or blinking, this light communicates different messages.
As we examine each individual message, how it is shown, and how it can be addressed, let’s look at each reason.
If the light on the Ring Doorbell is spinning blue.
When the light is spinning blue, the doorbell has been pushed normally. If you receive a notification that a call is pending, this is normal and nothing to worry about.
On the Ring Doorbell, if the light is a solid blue color.
It will occur when you answer a call or when you connect your Ring Doorbell to your phone if the light is solid blue. It is possible to hear the call if the doorbell speaker is on or if someone has connected the call.
On Ring Doorbell, if the light is blue and moving upward.
In the event that your Ring Doorbell’s light moves upward, it is connected to your Wi-Fi network.
It is very common during setup, but you may also experience Wi-Fi problems at other times. This may happen if your internet goes down due to a storm or power outage.
If the Ring doorbell is flashing or blinking blue, it should be on for 1 second and off for 1 second.
In the case of a flashing blue light, the Ring Doorbell is rebooting or restarting. If this continues without stopping for a long time, the doorbell might be stuck in a boot loop. In this case, contacting support might be the best course of action.
On Ring doorbells, there are four blue LEDs flashing or blinking four times.
There is no reason to be concerned about since your Ring Doorbell has been configured correctly.
You will see the blue lights flashing or blinking rapidly on the Ring doorbell, then they will turn white.
As a result, this indicates that you have successfully reset your Ring Doorbell back to factory settings.
It is possible that the top half of the Ring doorbell is flashing or blinking blue.
Blue flashing or blinking on the top half of the light can mean two different things depending on what it is. If the top half flashes blue during setup, it means that the password is bad. It is important to note that the Ring Doorbell is charged and connected to a power source when this occurs after the setup process.
What should I do if I see the Ring blue light flashing or blinking during setup?
In most cases, when your Ring Doorbell is set up, the light will be spinning and not flashing. When your doorbell is connected to your Wi-Fi network, the LED light will flash in a blue pattern that moves upwards.
If you enter the wrong password on your Ring app during setup, the top half of the blue light will flash. In order to complete setup, you must re-enter your password correctly.
When it’s ready to use, the light will flash blue four times, accompanied by a white circle.
The functionality of your doorbell may be delayed if you do not have a steady and strong Wi-Fi connection.
Do you know what to do if your Ring Doorbell flashing or blinking a blue light for no apparent reason?
When setup is complete, your Ring Doorbell will start flashing or blinking blue at one-second intervals. You may encounter this problem if your doorbell loses power or if its firmware is automatically updated.
If the Ring doorbell is steadily flashing or blinking, wait a few minutes for it to reboot. There is no problem with them rebooting occasionally, but if it happens frequently, it might be a problem.
Make sure your doorbell is charged frequently to prevent this from happening.
The wires should be intact and securely connected in the case of hardwired doorbells.
It may depend on the model of your Ring doorbell whether a blue light is flashing while it is charging. It is necessary to insert the charging cable into the port behind the doorbell in order to charge the battery in first and second generation models.
A flashing blue LED will indicate that the battery is charging when the circle light fills up. Fully charged batteries turn blue when they are fully charged.
It is possible to charge other battery-operated Ring doorbells externally by removing the batteries. After removing these, the light will go off, and after replacing them, it will come back on.
Despite being a hardwired device, the Ring Doorbell Pro will require a few hours of charging after the first setup. When the Ring doorbell is set up, the top half of the LED light will start blinking blue, and when it has finished charging, it will stop.
Your Rings app may indicate that your doorbell is low on power, even if it has just been charged. The doorbell will display the correct battery level after a few test rings if this happens.
When you press the doorbell button, your app’s battery measurement will automatically update.
Conclusion
Depending on how the blue light flashes on your Ring doorbell, each color means something different. The flashing or blinking blue light on a Ring doorbell is usually nothing to worry about, but understanding what it means will keep you calm. If it does mean there’s something wrong with it, you now know what it is.
Read More: