In addition to the WPA (Wi-Fi Protected Access) feature, the Netgear WiFi Extender easily connects to other devices. The Netgear WiFi Extender light will turn orange if it detects a problem with the connection. If it is your ISP’s (Internet Service Provider) fault, the orange light should become green.

Having a Netgear WiFi Extender is a no-brainer. You should check for a connection issue to avoid this. In the following article, I am going to present step-by-step instructions on how to fix Netgear Router Orange Light.

You may also love to read: How Do I Know If I Have A Smart TV?

My Netgear Router has an Orange Light issue, which can be fixed by following some troubleshooting steps.

Troubleshooting Process – 1 to Fix the Netgear Router Orange Light

First, make sure that your internet connection is working

Following that, unplug and re-plug the internet cable,

Reboot Your Modem

Once the router and modem have been rebooted, plug your computer directly into the modem if you can connect online proceed to step 4, if not, contact your internet service provider (ISP), which indicates the problem is not with the router, but with the network connection. To troubleshoot your network connection, check your Ethernet cable or settings, or call a technician.

If Despite the orange light flashing on your Netgear router, it needs to be re-configured and is being forced to perform a factory restore. This will ensure that your router is working properly and that you won’t have to deal with any problems.

You may also love to read: US/DS Light Blinking: How Do You Fix It?

Troubleshooting Process – 2

In There are a few steps you need to follow in case orange light is flashing due to some reason

• Connected properly
• A bad cable connection
• An unidentified network connection
• An issue with the firmware

Proper Connection

Several people have reported issues due to wrong connections. We recommend that you make sure that both of your devices are connected correctly, which means connecting your modem to the yellow port on your router. An Orange Light that fails to light will not go away without a proper connection.

You may also love to read: Verizon Router Showing Red Globe

Faulty Cable Connection

If In that case, try switching out the old Ethernet cable with a new one and see whether the green light turns on or blue light lights up on your Netgear router. This indicates that the problem lies with the Ethernet cable, and it is resolved by switching it with a new one. Your router can then stay connected to your modem.

 if After you check the green and blue lights, it is not working, so you could try another solution

• UN-Identified Network Connection

In In another case, the orange light may be flashing due to your Netgear Router not being able to detect a network. This generally occurs when your router or modem cannot identify your PC, in this case, you should clone your PC’s MAC address into the router and try connecting your PC with your modem again.

The Solution to This Network Issue with an Unidentified Network

The internet service providers (ISPs) of today allow you to connect to the internet on a limited number of computers. A unique media access control (MAC) can be locked by performing this step.

MAC addresses are used differently between the modem and other network hardware, so the router must be configured to use the MAC address of the internet service provider-approved computer, instead of its own. This is referred to as resetting the router’s MAC address.

You may also love to read: Roku Remote Blinking Green Light

By Following a few instructions will help you perform MAC cloning.

Start by opening the Netgear setting page, clicking advanced settings, clicking on MAC Cloning, and then clicking apply and OK.

Firmware Issue

Occasionally you might see an orange light issue because of firmware issues on your router, and this is something that you should resolve by updating the firmware, as sometimes the older firmware is unable to perform the necessary settings that are needed for a smooth connection.

So Updates should be made to the firmware software. The firmware section of routerlogin.net is where you can look for available updates, so go there and then click on the firmware tab.

Resetting Routers

In After following all the above steps, in the case the Netgear Router Orange Light remains, you will need to restart your modem as well as the Netgear EX 2700 router. Changing the configuration of your Netgear Router Press the reset button on your router and restart your modem and router simultaneously.

You may also love to read: Roomba Error 14: How To Fix?

In the end, you should be able to see the green light on the screen after you set up your router.

The orange light on a Netgear router can often be resolved by checking the network connection

 Here’s a step-by-step guide on how to fix Netgear Router Orange Light.