To program your TV, follow the easy step-by-step instructions below using the Xfinity remote control codes or Comcast remote codes. Utilize the Comcast remote codes to set up any TV, DVD player, Blu-ray player, audio video receiver, and music center using the Xfinity remote. However, you can pair TVs and troubleshoot pairing problems by following these steps. 

In addition, you can find the Comcast Xfinity Remote Control Codes list in your user manual or from this list of most popular TV brands.

The Comcast Remote Control Codes List consists of the following codes:

The most popular Comcast Xfinity remote codes are listed below.

LG

• 11265
• 10178

Panasonic

• 10250
• 10051

Samsung

• 10060
• 10812

Sanyo

• 10154
• 10159

Sony

• 11100
• 10000

Sharp

• 10165
• 10093

Toshiba

• 10156
• 11156

Vizio

• 11756
• 11758

Haier

• 10768
• 11034
• 11265
• 11009
• 10178

Hitachi

• 11345
• 11145
• 12143
• 10145
• 11960
• 12243
• 11904

Philips

• 11454
• 11483
• 10054
• 10037
• 10690

Sansui

• 11935
• 11904
• 10463
• 11911
• 11409

Sanyo

• 10159
• 10154

Additionally, in case you do not see your TV brand in our most popular TV codes, you can go to our complete list of Comcast Xfinity remote codes.

The following steps will show you how to program your remote using the RF pairing method:

• Firstly, make sure your TV and set-top box are powered on before installing the remote control batteries.
• Secondly, keep pressing the “Setup” button beneath the LED indicator on the remote till it goes from red to green.
• Then, the XFINITY button should be pressed
• Finally, the following list of Comcast remote codes can be used to enter the 3 digit code.

You can program your Comcast remote by using the following remote codes.

• First, in order to program the TV, you will need to turn it on.
• Secondly, the “Setup” button needs to be pressed and held until the remote’s status LED turns green.
• Thirdly, utilize the number buttons to enter a 4-digit or 5-digit code from the Comcast remote codes list below. However, for more information on additional Comcast remote codes, please consult the remote

The indicator LED will illuminate green two times if the code is provided accurately. If the code is typed incorrectly, the indicator LED will blink red, then green. Check that you are typing the code correctly and try again if you are having difficulty.

Your TV can be controlled using the remote control (use the Power, Volume, etc. buttons).

In the event that these steps do not work, try a 4-digit or 5-digit code and repeat the above steps.

Comcast Remote Codes for Pairing and Programming Your Xfinity Voice Remote.

Click here to locate your TV’s manufacturer setup code: 4 digits, 5 digits. Then follow the instructions listed below.

Comcast Remote Codes: Simple Steps for Programming Your Xfinity Remote.

1st Step : Prior to starting the process, verify that your TV and set-top box are powered on.
2nd Step : Then, switch the LED on the top of your remote from red to green by pressing the Setup button.
3rd Step : Use the number buttons on the remote to enter the universal remote code from the Comcast TV codes lookup tool.
4th Step : You should see the LED flash green twice after entering the code.
5th Step : Use the remote control on your device to hit the Power button to turn off the device.
6th Step : The TV will turn off once your remote has been programmed to control it.

Using Comcast remote codes, program your X1 remote control to your TV and audio devices.

After following the above steps, if you can’t find the Comcast remote codes that work for your TV.

1st Step : Let the red LED on the remote turn green by holding down the Setup button.
2nd Step : Press 9-9-1 on the remote and the LED should flash twice green.
3rd Step : Go to the TV display and push the CH ^ button continuously till the TV turns off.
4th Step : The TV should be turned off before you press Setup.
5th Step : In order to program your remote to control your TV, press the TV power button on the remote.

The Xfinity Remote needs to be troubleshooted.

Follow these steps to troubleshoot a Comcast Xfinity remote that does not respond to your commands.

The remote buttons on the Xfinity TV do not respond.

1. The remote should be set up by pressing the setup button.
2. Try replacing the batteries if the LED does not flash at all.
3. The LED flashes red five times when a button is pressed, indicating low batteries.

Use the Setup Button (XR11) to Factory Reset the Xfinity Remote.

Voice Remote (model XR11) buttons that aren’t responding may require a factory reset. However, performing a factory reset is as simple as following these steps.

1. Firstly, after pressing the Setup button on the remote, the LED should turn green.
2. Secondly, the 9-8-1 button should be pressed.
3. Finally, in order to indicate that the remote has been reset, the LED will blink green twice.

If you have reset your TV Box or remote, they will be unpaired, and you will need to pair them again.

Xfinity Voice Remote (XR15) can be reset to factory settings without using the Setup Button.

It may be necessary to perform a factory reset if the Voice Remote (XR15) buttons are still unresponsive. Moreover, these steps will walk you along the method to factory reset the Xfinity voice remote.

1. Firstly, keep holding down the A (triangle) and D (diamond) buttons simultaneously for a count of three to change the indicator LED from red to green.
2. Then, the 9-8-1 button should be pressed.
3. Finally, to indicate that the remote has been reset, the LED will blink blue three times.

How to disconnect your Xfinity Voice Remote from your TV.

After a remote is setup, it will not work with another TV until the pairing connection is broken.

The following instructions apply to Xfinity remotes with a Setup button:

1. Firstly, the status light will turn green after three seconds when you press and hold the Setup button.
2. Secondly, a green light blinks twice if the remote is disconnected from the TV after entering 9-8-1 on the remote.

XR15 Xfinity X1 and Flex Voice Remotes without a Setup button need to follow the instructions below.

1. Firstly, keep holding down the A (triangle) and D (diamond) buttons simultaneously for a count of three to change the indicator LED from red to green.
2. Finally, the Comcast Xfinity remote is now disconnected from the TV if the status light blinks blue twice when you enter 9-8-1 on the remote. Moreover, the remote connection with the TV is also referred to as pairing by some people. 

However, now you can connect your remote to a new TV Box, as well as to a different TV if you desire. In addition, the original X1 TV Box will still be controlled when aimed directly at it.

Read More: