One of the most common washer problems is a spin cycle issue, which results in piles of wet clothes and longer drying times. The question you may be asking yourself is, “why is my Maytag top load washer not spinning?” The wrong cycle or spin speed may be selected, which will result in slower rotations or no rotation at all. We provide solutions for the most likely causes of this problem in our troubleshooting guide.

Maytag washers are without a doubt one of the most reliable brands of kitchen appliances available today. Furthermore, they are known for being extremely quiet when they are in use. Whether you run a laundromat or live in an apartment complex where space is limited, these machines are ideal for any environment. Even so, Maytag washers can experience problems despite their reliability.

There are a variety of reasons why a Maytag washer is not spinning.

When it comes to a new Maytag washer that is not spinning properly, there is nothing worse than that. As you can imagine, there are typically a wide range of causes why your Maytag washer won’t spin. It might be that you are using a cycle that is too long or that you are using the wrong type of load, but don’t worry! With the help of this article, you will be able to resolve all the typical issues you may encounter with your washing machine’s spin cycle.

What you need to fix a Maytag Top Load Washer which is not spinning.

Often, a Maytag top load washer not spinning can be fixed yourself, but sometimes you’ll need a pro. If your Maytag washer won’t spin, you can fix the problem by pinpointing the actual cause.

Make sure that the spin and wash cycles are set correctly.

In the majority of cases, the biggest conceivable cause of a Maytag top load washer not spinning is the wrong wash cycle or spin setting. Delicate fabrics require slower spin speeds in settings such as GENTLE, HANDWASH, or DELICATE. Additionally, some washing machines allow you to adjust the spin speed to suit the load by slowing it down or speeding it up.

Prior to starting a wash cycle, make sure the spin speed and setting are correct.

If your Maytag washer is not spinning, then it is important to make sure the wash load is properly sized and balanced.

There is a possibility that a Maytag washer won’t spin dry clothes if it’s overloaded with too many items or if there is a single large item. The spin speed of the washer can be slowed if the drum is too heavy or unbalanced, with too much weight on one side. As a result, clothes will be wet at the end of the wash cycle and will take longer to dry.

Make sure your wash load spins properly by following these tips:

• You can find the capacity of your washer in the user manual. Whenever you load the washer, fill it only three-fourths full to avoid overloading.

• Make sure a large or heavy item is balanced with one of a similar size. Be sure to arrange large items evenly around the agitator if your top load washer has one.

• Reposition items evenly around the drum of the washer if the load becomes unbalanced during the spin cycle.

Examine the assembly that controls the lid of the washer.

In the case of a Maytag washer not spinning when the lid is closed, the lid switch assembly may be defective. A safety switch signals when the lid of the washer is properly closed, causing it to begin spinning. Verify that no obstructions are blocking the Maytag washer lid from closing properly if it doesn’t spin after you close it.

Is the lid closing properly, without any obstructions? It is possible that the lid switch assembly is faulty in this case. The switch should be replaced if a multimeter test shows no continuity.

The drive belt of the washer should be inspected.

If your washer spin cycle isn’t working properly, it may be due to a damaged drive belt. A rubber belt supports the weight of the washer drum and helps it spin by circling it around two pulleys. In the event that the belt is damaged, it will not be able to support the drum or facilitate its rotation. It will stop spinning altogether or spin louder than usual when this happens.

Make sure that the drive belt is not stretched, frayed, or torn by inspecting it. If there is visible damage to the drive belt, it must be replaced.

The motor coupling of the washer should be examined.

It is also possible for a failed motor coupling to cause your washer’s spin cycle not to work. Power is transmitted to the washer drum through the motor coupling between the motor and transmission.

Despite the fact that the coupling can fail over time, repeated heavy loads can cause it to fail prematurely. In this case, the washer drum will be unable to spin because of a lack of power. It is necessary to replace the motor coupling if it has broken.

Maytag washer transmission needs to be replaced.

In case you still haven’t found the cause of your Maytag washer not spinning, you may consider replacing the transmission. Usually, this is not the cause of Maytag washers not working, but it can happen. Alternatively, you may decide that buying a new washer is the best option.

Read More: