One thing that makes the Jumbo universal remote control stand out from other universal remote is the size. Unlike other remotes that are long and narrow, the Jumbo remote is short and broad. You can use a Jumbo universal remote control to program your TV, Cable Box, DVD player, Satellite and other electronic devices in your home. To do this, you need the Jumbo universal remote codes and how to do the programming. This other post has listed out the Jumbo universal remote codes for most brands.

For this post, you will learn how to program a Jumbo universal remote to a TV or other electronic device. You will need the codes to do so. So, it is best to check the other post and get the codes first before you continue.

How to program a Jumbo Universal Remote control Using Codes

Step 1. Ensure that you turn on the Device you want to program to your remote control.

Step 2. Hold your Jumbo universal remote and point the head to face your TV or DVD player or the device you want to program.

Step 3. You will see the CABL, TV, VCR, DVD and SAT button options on your Jumbo remote. Press the button that corresponds with your electronic device. For instance, if it’s a DVD player you want to program, press the DVD option.

Step 4. Press and hold the ‘Code Search’ button until the tiny LED comes on.

Step 5. Key in the correct Jumbo universal remote code you got from the other article. You press in the numbers using the number keys on your Jumbo remote. For each type you key in a number, the tiny LED light will blink once. After you type the correct code, the tiny LED light will turn off. If the light remains on, it means you got the incorrect code. Pick another code and try again.

Step 6. Press the ‘Power’ button on the Jumbo remote. If your TV or electronic device turns off, viola, you got the correct code.

How to program a Jumbo Universal Remote control using Code Search

If you don’t want to go through the stress of searching for the correct code, then you can use this method to program your remote. Although it is advisable to use the code method because it will save you much time.

Step 1. Ensure that you turn on the device you want to program to your remote control.

Step 2. Hold your Jumbo universal remote and point the head to face your TV or DVD player or the device you want to program.

Step 3. Press and hold the ‘Code Search’ button until the tiny LED comes on.

Step 4. You will see the CABL, TV, VCR, DVD and SAT button options on your Jumbo remote. Press the button that corresponds with your electronic device. For instance, if it’s a DVD player you want to program, press the DVD option.

Step 5. Continuously press the power button on your remove until your device switches off. As you press the power button, your remote is going through the codes programmed into it. So it may take a while to get the right code. Once your device goes off, it means the correct code has been found.

Step 6. Finally, find and press the ‘Enter’ button on your Jumbo remote control to save the remote found. Viola, you have programmed your remote.

All-In-One Jumbo Universal Remote codes

• 000
• 001
• 002
• 200
• 172
• 005
• 006

Please check the TV category to get other universal remote codes. If there is any code you want us to add, please send us a mail and we will find the codes for you.